SMR Gearbox Selection Guide: Speed, Torque and Shaft Fit
Select an SMR shaft mounted speed reducer by output speed, working torque, duty, shaft fit and mounting conditions. Includes a practical inquiry checklist.

Select an XINCHI SMR shaft mounted speed reducer by the driven machine's speed, duty and shaft fit. The term SMSR gearbox is also used for this belt-driven, hollow-shaft arrangement. This guide compares the eight nominal 5:1 models and explains the information needed for a conveyor gearbox inquiry.
Compare the eight 5:1 SMR frames
The following dimensions and weights refer to the 5:1 catalog units. The alternative bore is an ordering option. Confirm keys, tolerances, mounting space and final drawings before approving a replacement.
| Model | Exact ratio | Standard / alternative bore (mm) | Input shaft (mm) | Weight (kg) |
|---|---|---|---|---|
| SMR B5 | 5.05:1 | 30 / 40 | 19 | 15 |
| SMR C5 | 5.05:1 | 40 / 50 | 22 | 21 |
| SMR D5 | 5.047:1 | 50 / 55 | 25 | 30 |
| SMR E5 | 5.047:1 | 55 / 65 | 28 | 41 |
| SMR F5 | 5.047:1 | 65 / 75 | 32 | 53 |
| SMR G5 | 5.047:1 | 75 / 85 | 42 | 82 |
| SMR H5 | 5.047:1 | 85 / 100 | 48 | 133 |
| SMR J5 | 5.047:1 | 100 / 120 | 55 | 194 |
1. Calculate speed through both drive stages
Gearbox input speed can differ from motor speed because of the pulley reduction. Calculate output rpm as gearbox input rpm divided by the exact gear ratio. For example, B5 and C5 use 5.05:1, so 1,000 rpm input gives approximately 198.0 rpm output. D5 through J5 use 5.047:1, giving approximately 198.1 rpm at the same input speed. These are speed calculations, not proof of power capacity.
2. Apply the duty factor before comparing ratings
Design power equals absorbed machine power multiplied by the applicable service factor. Use motor power if the absorbed power is unknown. The catalog service factors below depend on load class and daily operating hours; assess starts, shocks and the actual machine before assigning a class.
| Load class | Under 10 h/day | 10–16 h/day | Over 16 h/day |
|---|---|---|---|
| Uniform | 1.00 | 1.12 | 1.25 |
| Moderate shock | 1.25 | 1.40 | 1.60 |
| Heavy shock | 1.60 | 1.60 | 2.00 |
Compare design power with the rating at the intended output speed on the selected model page. For instance, D5 is rated 9.45 kW at 200 rpm, while E5 is rated 14.91 kW at 200 rpm. Do not use a rating quoted at a different speed as a universal motor limit.
3. Choose the application and check its starts
Compact grain or animal-feed transfer may lead you to assess B5, while general material handling can be compared with C5. Sand, gravel and screen-feed conveyors require particular attention to damp material and loaded starts. F5 and G5 provide larger interfaces to evaluate for aggregate transfer. H5 and J5 can be assessed for larger bulk-handling sections. These are application examples; the calculation and shaft checks determine the selection.

4. Confirm shaft fit and installation
Record driven shaft diameter, engagement length, keyway, retention and shoulder position. Include input pulley diameter, belt arrangement and distance from the housing so overhung loading can be assessed. Locate the reducer close to the driven bearing, anchor the torque arm correctly and guard rotating parts. The catalog states units are supplied without oil; fill to the specified level with the correct grade before operation.
Backstops are not recommended for 5:1 units. If a conveyor has rollback risk, ask XINCHI to review an engineered system solution and suitable configuration before ordering. Do not assume an accessory for another ratio fits the 5:1 reducer.
India SMSR gearbox inquiry checklist
For a shaft mounted speed reducer, SMSR gearbox, belt conveyor gearbox or stone crusher plant conveyor inquiry, send the model or existing nameplate, motor kW and rpm, required output speed, pulley sizes, shaft drawing, daily hours, starts per hour, material handled and mounting orientation. Include quantity and delivery destination. XINCHI can use these details to review the configuration; do not select from the model code alone.
Browse the SMR product category, review the series overview, or send XINCHI a selection inquiry.
Technical basis: supplied SMR catalog ratings, dimensions and service-factor tables. Confirm the final rating and installation drawing for the ordered unit.