
XINCHI SMR H5 Shaft Mounted Speed Reducer | 5:1 SMSR Gearbox
XINCHI SMR H5 5:1 SMSR gearbox: exact ratio 5.047:1, 85/100 mm output bore, 48 mm input shaft and 133 kg catalog weight. View conveyor applications, speed-dependent kW ratings and shaft-fit selection details.
SMR H5 5:1 SMSR gearbox for conveyor drives
The XINCHI SMR H5 shaft mounted speed reducer uses a hollow output hub and a torque arm for a compact belt-driven arrangement. This model has a nominal 5:1 reduction; its exact catalog ratio is 5.047:1. Buyers searching for an SMR reducer, SMSR gearbox or conveyor gearbox can use the model-specific data below to compare the correct frame.
H5 specifications
| Parameter | SMR H5 |
|---|---|
| Nominal reduction ratio | 5:1 |
| Exact reduction ratio | 5.047:1 |
| Standard / alternative output bore | 85 / 100 mm |
| Input shaft diameter | 48 mm |
| Catalog weight, 5:1 unit | 133 kg |
| Catalog output torque at 100 rpm | 3457 Nm |
| Backstop | Not recommended for 5:1 units |
Power ratings at selected output speeds
Ratings below are catalog power ratings in kW at the stated output speed. They are not a universal motor-power range. Apply the service factor and check the complete drive before selection; the torque above applies specifically at 100 rpm.
| Output speed (rpm) | Power rating (kW) |
|---|---|
| 100 | 36.20 |
| 150 | 47.30 |
| 200 | 53.60 |
| 250 | 60.40 |
| 300 | 66.20 |
| 350 | 73.50 |
| 400 | 81.90 |
Application: Overland and continuous bulk-handling belts
H5 can be considered for larger bulk-handling or overland conveyor sections after a complete duty assessment. Longer belts may have demanding starts and changing loading conditions, so share starting method, operating hours and required output speed as well as motor power. Plan a suitable lifting method for the 133 kg catalog unit and verify the approved mounting arrangement. Match the 85 mm standard bore or 100 mm alternative bore to the shaft and check bearing proximity and maintenance clearance.

Selection for India-market SMSR gearbox inquiries
For an SMSR gearbox or belt conveyor gearbox inquiry from India, specify SMR H5, the required bore, absorbed power, output rpm, motor rpm, pulley sizes, daily operating hours and load shocks. Design power equals absorbed power multiplied by the appropriate service factor; use motor power when absorbed power is unknown. Output speed equals reducer input speed divided by 5.047, and any belt-stage reduction must be included.
For example, a reducer input of 1,000 rpm gives approximately 198.1 rpm output. A pulley drive can change this input speed. A stone crusher plant conveyor, sand conveyor or grain conveyor must still be checked for its own starting and running duty. For rollback-sensitive systems, request an engineered solution: backstops are not recommended for the 5:1 units.
Construction, installation and maintenance
The series uses a cast-iron housing, alloy helical gearing, hardened shafts and double-lip oil seals. Fit the reducer close to the driven bearing and keep the input pulley close to the reducer to limit overhung loading. Secure the torque arm to a suitable rigid anchor, check alignment and guard the rotating transmission. The catalog states units are supplied without oil: fill with the specified oil grade to the correct level for the mounting orientation before operation. Confirm shaft tolerances, keys and the final drawing with XINCHI.
The main product photograph represents the SMR series; confirm the supplied H5 configuration and bore with the approved drawing.
Compare SMR models and request a quotation
Browse the SMR shaft mounted speed reducer category and the SMR series overview. Compare adjacent frames using their own ratings: SMR B5 | SMR C5 | SMR D5 | SMR E5 | SMR F5 | SMR G5 | SMR J5.
Contact XINCHI for a H5 quotation and duty check. Include your application, bore, speed, motor power, mounting orientation and delivery destination so the configuration can be confirmed.
Technical basis: SMR catalog, 5:1 ratings and dimension tables. All ratings are conditional on the specified speed and duty; final selection requires application review.