
XINCHI SMR J5 Shaft Mounted Speed Reducer | 5:1 SMSR Gearbox
XINCHI SMR J5 5:1 SMSR gearbox: exact ratio 5.047:1, 100/120 mm output bore, 55 mm input shaft and 194 kg catalog weight. View conveyor applications, speed-dependent kW ratings and shaft-fit selection details.
SMR J5 5:1 SMSR gearbox for conveyor drives
The XINCHI SMR J5 shaft mounted speed reducer uses a hollow output hub and a torque arm for a compact belt-driven arrangement. This model has a nominal 5:1 reduction; its exact catalog ratio is 5.047:1. Buyers searching for an SMR reducer, SMSR gearbox or conveyor gearbox can use the model-specific data below to compare the correct frame.
J5 specifications
| Parameter | SMR J5 |
|---|---|
| Nominal reduction ratio | 5:1 |
| Exact reduction ratio | 5.047:1 |
| Standard / alternative output bore | 100 / 120 mm |
| Input shaft diameter | 55 mm |
| Catalog weight, 5:1 unit | 194 kg |
| Catalog output torque at 100 rpm | 5940 Nm |
| Backstop | Not recommended for 5:1 units |
Power ratings at selected output speeds
Ratings below are catalog power ratings in kW at the stated output speed. They are not a universal motor-power range. Apply the service factor and check the complete drive before selection; the torque above applies specifically at 100 rpm.
| Output speed (rpm) | Power rating (kW) |
|---|---|
| 100 | 62.20 |
| 150 | 81.90 |
| 200 | 96.60 |
| 250 | 109.20 |
| 300 | 118.70 |
| 350 | 126.00 |
| 400 | 134.20 |
Application: Large bulk-transfer and loading conveyor systems
J5 is the largest frame in this eight-model 5:1 selection. It can be evaluated for high-capacity bulk-transfer and loading conveyor systems when design power, shaft loads and installation conditions satisfy the catalog checks. The 194 kg catalog weight requires planned handling and support during assembly. Its 100 mm standard bore, 120 mm alternative and 55 mm input shaft need drawing-level confirmation. For a port or bulk-loading inquiry, include material density, loading changes, starts per hour and operating hours rather than selecting by frame size alone.

Selection for India-market SMSR gearbox inquiries
For an SMSR gearbox or belt conveyor gearbox inquiry from India, specify SMR J5, the required bore, absorbed power, output rpm, motor rpm, pulley sizes, daily operating hours and load shocks. Design power equals absorbed power multiplied by the appropriate service factor; use motor power when absorbed power is unknown. Output speed equals reducer input speed divided by 5.047, and any belt-stage reduction must be included.
For example, a reducer input of 1,000 rpm gives approximately 198.1 rpm output. A pulley drive can change this input speed. A stone crusher plant conveyor, sand conveyor or grain conveyor must still be checked for its own starting and running duty. For rollback-sensitive systems, request an engineered solution: backstops are not recommended for the 5:1 units.
Construction, installation and maintenance
The series uses a cast-iron housing, alloy helical gearing, hardened shafts and double-lip oil seals. Fit the reducer close to the driven bearing and keep the input pulley close to the reducer to limit overhung loading. Secure the torque arm to a suitable rigid anchor, check alignment and guard the rotating transmission. The catalog states units are supplied without oil: fill with the specified oil grade to the correct level for the mounting orientation before operation. Confirm shaft tolerances, keys and the final drawing with XINCHI.
The main product photograph represents the SMR series; confirm the supplied J5 configuration and bore with the approved drawing.
Compare SMR models and request a quotation
Browse the SMR shaft mounted speed reducer category and the SMR series overview. Compare adjacent frames using their own ratings: SMR B5 | SMR C5 | SMR D5 | SMR E5 | SMR F5 | SMR G5 | SMR H5.
Contact XINCHI for a J5 quotation and duty check. Include your application, bore, speed, motor power, mounting orientation and delivery destination so the configuration can be confirmed.
Technical basis: SMR catalog, 5:1 ratings and dimension tables. All ratings are conditional on the specified speed and duty; final selection requires application review.